Install Tomcat 8 on CentOS, RHEL, or Fedora

Step 1: Install JDK 1.7

You can download the latest JDK here: http://www.oracle.com/technetwork/java/javase/downloads/index.html

We’ll install JDK 7, Update 60 (7u60). The JDK is specific to 32 and 64 bit versions.

My CentOS box is 64 bit, so I’ll need: jdk-7u60-linux-x64.tar.gz.

If you are on 32 bit, you’ll need: jdk-7u60-linux-i586.tar.gz

Start by creating a new directory /usr/java:

[root@srv6 ~]# mkdir /usr/java

Change to the /usr/java directory we created

[root@srv6 ~]# cd /usr/java

[root@srv6 java ]#

Download the appropriate JDK and save it to /usr/java directory we created above.

Unpack jdk-7u60-linux-x64.tar.gz in the /usr/java directory using tar -xzf:

[root@srv6 java]# tar -xzf jdk-7u60-linux-x64.tar.gz

This will create the directory /usr/java/jdk1.7.0_60. This will be our JAVA_HOME.

We can now set JAVA_HOME and put Java into the path of our users.

To set it for your current session, you can issue the following from the CLI:

[root@srv6 java]# JAVA_HOME=/usr/java/jdk1.7.0_60

[root@srv6 java]# export JAVA_HOME

[root@srv6 java]# PATH=$JAVA_HOME/bin:$PATH

[root@srv6 java]# export PATH

To set the JAVA_HOME permanently, however, we need to add below to the ~/.bash_profile of the user (in this case, root).
We can also add it /etc/profile and then source it to give to all users.

JAVA_HOME=/usr/java/jdk1.7.0_60

export JAVA_HOME

PATH=$JAVA_HOME/bin:$PATH

export PATH

Once you have added the above to ~/.bash_profile, you should log out, then log back in and check that the JAVA_HOME is set correctly.

[root@srv6 ~]#  echo $JAVA_HOME

/usr/java/jdk1.7.0_60

Note: If you decided to use JDK 6 rather than 7 as we did above, simply save the JDK 6 bin file to /opt (or another location), then navigate to /usr/java and issue: ‘sh /opt/jdk-6u33-linux-x64.bin’. This will create a JAVA Home of /usr/java/jdk1.6.0.33

Step 2: Download and Unpack Tomcat 8.0.8 (or latest)

We will install Tomcat 8 under /usr/share.

Switch to the /usr/share directory:

[root@srv6 ~]# cd /usr/share

[root@srv6 share ]#

Download apache-tomcat-8.0.8.tar.gz (or the latest version) here

and save it to /usr/share

Once downloaded, you should verify the MD5 Checksum for your Tomcat download using the md5sum command.

[root@srv6 share ]# md5sum apache-tomcat-8.0.8.tar.gz

c377b34fc4d228a63f7f1a51efbec333 *apache-tomcat-8.0.8.tar.gz

Compare the output above to the MD5 Checksum provided next to the download link and you used above and check that it matches.

unpack the file using tar -xzf:

[root@srv6 share ]# tar -xzf apache-tomcat-8.0.8.tar.gz

This will create the directory /usr/share/apache-tomcat-8.0.8

Step 3: Configure Tomcat to Run as a Service.

We will now see how to run Tomcat as a service and create a simple Start/Stop/Restart script, as well as to start Tomcat at boot.

Change to the /etc/init.d directory and create a script called ‘tomcat’ as shown below.

[root@srv6 share]# cd /etc/init.d

[root@srv6 init.d]# vi tomcat

And here is the script we will use.

#!/bin/bash

# description: Tomcat Start Stop Restart

# processname: tomcat

# chkconfig: 234 20 80

JAVA_HOME=/usr/java/jdk1.7.0_60

export JAVA_HOME

PATH=$JAVA_HOME/bin:$PATH

export PATH

CATALINA_HOME=/usr/share/apache-tomcat-8.0.8

case $1 in

start)

sh $CATALINA_HOME/bin/startup.sh

;;

stop)

sh $CATALINA_HOME/bin/shutdown.sh

;;

restart)

sh $CATALINA_HOME/bin/shutdown.sh

sh $CATALINA_HOME/bin/startup.sh

;;

esac

exit 0

The above script is simple and contains all of the basic elements you will need to get going.

As you can see, we are simply calling the startup.sh and shutdown.sh scripts located in the Tomcat bin directory (/usr/share/apache-tomcat-8.0.8/bin).

You can adjust your script according to your needs and, in subsequent posts, we’ll look at additional examples.

CATALINA_HOME is the Tomcat home directory (/usr/share/apache-tomcat-8.0.8)

Now, set the permissions for your script to make it executable:

[root@srv6 init.d]# chmod 755 tomcat

We now use the chkconfig utility to have Tomcat start at boot time. In my script above, I am using chkconfig: 234 20 80. 2345 are the run levels and 20 and 80 are the stop and start priorities respectively. You can adjust as needed.

[root@srv6 init.d]# chkconfig –add tomcat

[root@srv6 init.d]# chkconfig –level 234 tomcat on

Verify it:

[root@srv6 init.d]# chkconfig –list tomcat

tomcat          0:off   1:off   2:on    3:on    4:on    5:off   6:off

Now, let’s test our script.

Start Tomcat:

[root@srv6 ~]# service tomcat start

Using CATALINA_BASE:   /usr/share/apache-tomcat-8.0.8

Using CATALINA_HOME:   /usr/share/apache-tomcat-8.0.8

Using CATALINA_TMPDIR: /usr/share/apache-tomcat-8.0.8/temp

Using JRE_HOME:        /usr/java/jdk1.7.0_60

Using CLASSPATH:       /usr/share/apache-tomcat-8.0.8/bin/bootstrap.jar:/usr/share/apache-tomcat-8.0.8/bin/tomcat-juli.jar

Stop Tomcat:

[root@srv6 ~]# service tomcat stop

Using CATALINA_BASE:   /usr/share/apache-tomcat-8.0.8

Using CATALINA_HOME:   /usr/share/apache-tomcat-8.0.8

Using CATALINA_TMPDIR: /usr/share/apache-tomcat-8.0.8/temp

Using JRE_HOME:        /usr/java/jdk1.7.0_60

Using CLASSPATH:       /usr/share/apache-tomcat-8.0.8/bin/bootstrap.jar:/usr/share/apache-tomcat-8.0.8/bin/tomcat-juli.jar

Restarting Tomcat (Must be started first):

[root@srv6 ~]# service tomcat restart

Using CATALINA_BASE:   /usr/share/apache-tomcat-8.0.8

Using CATALINA_HOME:   /usr/share/apache-tomcat-8.0.8

Using CATALINA_TMPDIR: /usr/share/apache-tomcat-8.0.8/temp

Using JRE_HOME:        /usr/java/jdk1.7.0_60

Using CLASSPATH:       /usr/share/apache-tomcat-8.0.8/bin/bootstrap.jar:/usr/share/apache-tomcat-8.0.8/bin/tomcat-juli.jar

Using CATALINA_BASE:   /usr/share/apache-tomcat-8.0.8

Using CATALINA_HOME:   /usr/share/apache-tomcat-8.0.8

Using CATALINA_TMPDIR: /usr/share/apache-tomcat-8.0.8/temp

Using JRE_HOME:        /usr/java/jdk1.7.0_60

Using CLASSPATH:       /usr/share/apache-tomcat-8.0.8/bin/bootstrap.jar:/usr/share/apache-tomcat-8.0.8/bin/tomcat-juli.jar

We should review the Catalina.out log located at /usr/share/apache-tomcat-8.0.8/logs/catalina.out and check for any errors.

[root@srv6 init.d]# more /usr/share/apache-tomcat-8.0.8/logs/catalina.out

We can now access the Tomcat Manager page at:

http://yourdomain.com:8080 or http://yourIPaddress:8080

and we should see the Tomcat home page.

Step 4: Configuring Tomcat Manager Access.

Tomcat 8 contains a number of changes that offer finer-grain roles.

For security reasons, no users or passwords are created for the Tomcat manager roles by default. In a production deployment, it is always best to remove the Manager application.

To set roles, user name(s) and password(s), we need to configure the tomcat-users.xml file located at $CATALINA_HOME/conf/tomcat-users.xml.

In the case of our installation, $CATALINA_HOME is located at /usr/share/apache-tomcat-8.0.8.

By default the Tomcat 8 tomcat-users.xml file will have the elements between the and tags commented-out. .

New roles for Tomcat 8 offer finer-grained access and The following roles are now available:

manager-gui
manager-status
manager-jmx
manager-script
admin-gu
admin-script.

We can set the manager-gui role, for example as below

 

<role rolename=”manager-script”/>
<role rolename=”manager-gui”/>
<role rolename=”admin-gui”/>
<role rolename=”manager-status”/>
<user username=”admin” password=”admin” roles=”manager-gui,manager-script,admin-gui,manager-status”/>

Caution should be exercised in granting multiple roles so as not to under-mind security.

Step 5 (Oprtional): Manage Memory Usage Using JAVA_OPTS.

Getting the right heap memory settings for your installation will depend on a number of factors.

For simplicity, we will set our inital heap size, Xms, and our maximum heap size, Xmx, to the same value of 128 Mb

Simliarly, there are several approaches you can take as to where and how you set your JAVA_OPTS

Again, for simplicity, we will add our JAVA_OPTS memory parameters in our Catalina.sh file.

So, open the Catalina.sh file located under /usr/share/apache-tomcat-8.0.8/bin with a text editor or vi.

Since we are using 128 Mb for both initial and maximum heap size, add the following line to Catalina.sh

JAVA_OPTS=“-Xms128m -Xmx128m”

I usually just add this in the second line of the file so it looks as so:

#!/bin/sh

JAVA_OPTS=“-Xms128m -Xmx128m”

# Licensed to the Apache Software Foundation (ASF) under one or more

# contributor license agreements.  See the NOTICE file distributed with

# this work for additional information regarding copyright ownership.

# The ASF licenses this file to You under the Apache License, Version 2.0

# (the “License”); you may not use this file except in compliance with

# the License.  You may obtain a copy of the License at

 

Step 6 (Optional): How to Run Tomcat using Minimally Privileged (non-root) User.

In our Tomcat configuration above, we are running Tomcat as Root.

For security reasons, it is always best to run services with the only those privileges that are necessary.

There are some who make a strong case that this is not required, but it’s always best to err on the side of caution.

To run Tomcat as non-root user, we need to do the following:

1. Create the group ‘tomcat’:

  1. [root@srv6 ~]# groupadd tomcat

2. Create the user ‘tomcat’ and add this user to the tomcat group we created above.

  1. [root@srv6 ~]# useradd -s /bin/bash -g tomcat tomcat

The above will create a home directory for the user tomcat in the default user home as /home/tomcat

If we want the home directory to be elsewhere, we simply specify so using the -d switch.

  1. [root@srv6 ~]# useradd -g tomcat -d /usr/share/apache-tomcat-8.0.8/tomcat tomcat

The above will create the user tomcat’s home directory as /usr/share/apache-tomcat-8.0.8/tomcat

3. Change ownership of the tomcat files to the user tomcat we created above:

  1. [root@srv6 ~]# chown -Rf tomcat.tomcat /usr/share/apache-tomcat-8.0.8/

Note: it is possible to enhance our security still further by making certain files and directories read-only. This will not be covered in this post and care should be used when setting such permissions.

4. Adjust the start/stop service script we created above. In our new script, we need to su to the user tomcat:

#!/bin/bash

# description: Tomcat Start Stop Restart

# processname: tomcat

# chkconfig: 234 20 80

JAVA_HOME=/usr/java/jdk1.7.0_60

export JAVA_HOME

PATH=$JAVA_HOME/bin:$PATH

export PATH

CATALINA_HOME=/usr/share/apache-tomcat-8.0.8/bin

case $1 in

start)

/bin/su tomcat $CATALINA_HOME/startup.sh

;;

stop)

/bin/su tomcat $CATALINA_HOME/shutdown.sh

;;

restart)

/bin/su tomcat $CATALINA_HOME/shutdown.sh

/bin/su tomcat $CATALINA_HOME/startup.sh

;;

esac

exit 0

 

Step 7 (Optional): How to Run Tomcat on Port 80 as Non-Root User.

Note: the following applies when you are running Tomcat in “stand alone” mode with Tomcat running under the minimally privileged user Tomcat we created in the previous step.

To run services below port 1024 as a user other than root, you can add the following to your IP tables:

[root@srv6 ~]# iptables -t nat -A PREROUTING -p tcp -m tcp –dport 80 -j REDIRECT –to-ports 8080

[root@srv6 ~]# iptables -t nat -A PREROUTING -p udp -m udp –dport 80 -j REDIRECT –to-ports 8080

Be sure to save and restart your IP Tables.

Step 8 (Optional): Running Tomcat behind Apache

As an alternative to running Tomcat on port 80, if you have Apache in front of Tomcat, you can use mod_proxy as well as ajp connector to map your domain to your Tomcat application(s) using an Apache vhost as shown below.

While Tomcat has improved it’s ‘standalone performance’, I still prefer to have Apace in front of it for a number of reasons.

In your Apache config, be sure to set KeepAlive to ‘on’. Apache tuning, of course, is a whole subject in itself…

Example 1: VHOST with mod_proxy:

<VirtualHost *:80>

ServerAdmin admin@yourdomain.com

ServerName yourdomain.com

ServerAlias www.yourdomain.com

ProxyRequests Off

ProxyPreserveHost On

<Proxy *>

Order allow,deny

Allow from all

</Proxy>

ProxyPass / http://localhost:8080/

ProxyPassReverse / http://localhost:8080/

ErrorLog logs/yourdomain.com-error_log

CustomLog logs/yourdomain.com-access_log common

/VirtualHost>

Example 2: VHOST with ajp connector and mod_proxy:

<VirtualHost *:80>

ServerAdmin admin@yourdomain.com

ServerName yourdomain.com

ServerAlias www.yourdomain.com

ProxyRequests Off

ProxyPreserveHost On

<Proxy *>

Order allow,deny

Allow from all

</Proxy>

ProxyPass / ajp://localhost:8009/

ProxyPassReverse / ajp://localhost:8009/

ErrorLog logs/yourdomain.com-error_log

CustomLog logs/yourdomain.com-access_log common

</VirtualHost>

In both vhost examples above, we are “mapping” the domain to Tomcat’s ROOT directory.

If we wish to map to an application such as yourdomain.com/myapp, we can add some rewrite as shown below.

This will rewrite all requests for yourdomain.com to yourdomain.com/myapp.

Example 3: VHOST with rewrite:

<VirtualHost *:80>

ServerAdmin admin@yourdomain.com

ServerName yourdomain.com

ServerAlias www.yourdomain.com

RewriteEngine On

RewriteRule ^/$ myapp/ [R=301]

ProxyRequests Off

ProxyPreserveHost On

<Proxy *>

Order allow,deny

Allow from all

</Proxy>

ProxyPass / ajp://localhost:8009/

ProxyPassReverse / ajp://localhost:8009/

ErrorLog logs/yourdomain.com-error_log

CustomLog logs/yourdomain.com-access_log common